Scroll down to discover
Place Tx Track Pro transmitters set on the code LAP between the START and the FINISH transmitter to get intermediate LAP times.
Place Tx Track Pro transmitters set on the code LAP between the START and the FINISH transmitter to get intermediate LAP times.
This transmitter is robust, resistant to water and extreme temperatures. Also, it has a rechargeable Lithium-Ion battery and an automatic switch off function to save the battery.
How does it work ?
01
Turn it on by pressing the “Power” button for 2s.
02
Make short presses on the “Power” button to select the desired code.
03
Place it on the ground, less than 3m from the skier’s pass. It can be placed inside a slalom gate.
It can also be placed under the snow in the middle of the finish area to increase the detection field (7 meters).
01
Turn it on by pressing the “Power” button for 2s.
02
Make short presses on the “Power” button to select the desired code.
03
Place it on the ground, less than 3m from the skier’s pass. It can be placed inside a slalom gate.
It can also be placed under the snow in the middle of the finish area to increase the detection field (7 meters).
Technical Sheet:
• Weight: 320 g
• Dimensions: 55 x 115 x 195 mm
• Compatibility: FxChip / FxChip BLE
• Transmitter with 3 codes: START / LAP / FINISH
• Detection field: 3 meters on each side
• Accuracy: 2/100 second
• Minimum distance between 2 transmitters: 10 meters
• Battery: 3.7V 5Ah LiPo + charging indicator, and automatic switch off function after 12h (charging time 10h)
• Battery life: 60 hours
• Water resistance: 3ATM
• Operating temperatures: -20°C to +50°C
Instructions for use:
Instructions for use: